AUTHORS: PALMER, ANDREW C. AND ROGER KING
ISBN:9781593701338
Subsea Pipeline Engineering was the first of its kind, written by two of the world�s most respected authorities in subsea pipeline engineering. In the second edition, these industry veterans have updated their definitive reference book, covering the entire spectrum of subjects in the discipline, from route selection and planning to design, construction, installation, materials and corrosion, inspection, welding, repair, risk assessment, and applicable design codes and standards. Particular attention is also devoted to the important specialized subjects of hydraulics, strength, stability, fracture, upheaval, lateral buckling and decommissioning. The book is distilled from the authors' vast experience in industry and their world-renowned course on Subsea Pipeline Engineering.
Features and benefits:
- Contains valuable information from the authors� respected short course on the subject
- The first text to offer an in-depth examination of marine pipeline construction
- Instructs on effective techniques for laying pipeline at great depths
Table of Contents:
- Acknowledgments
- Preface
- Introduction
- Route Selection
- Carbon-Manganese Steels
- Increasing Corrosion Resistance
- Welding
- Flexible and Composite Pipelines
- Internal Corrosion and Its Prevention
- External Corrosion, Coatings, Cathodic Protection, and Concrete
- Pipeline Hydraulics
- Strength
- Stability
- Construction
- Shore Approaches
- Upheaval and Spans
- Inspection
- Risk, Accidents, and Repair
- Decommissioning
- Future Development
- Appendix A: Glossary
- Appendix B: Codes and Standards
- Appendix C: Units
650 Pages/Hardcover/6x9/August 2008